mGalaxy forum
General Discussions => Need Help? => Topic started by: Zixo on April 21, 2015, 06:10:05 AM
-
Hi guys, I've this problem, mgalaxy doesn't launch zinc roms.
I've put the mgalaxy script.exe for zinc in the zinc emulator folder and then selected use script if aviable, but when i try to launch a rom nothing happen.
-
This system is a little bit complicated to configure if you never use it.
First, there is 2 emulator for this system psxmame and Zinc.
For Zinc have you installed the full package ? with ZiNcGUI.exe and all the plugging for joystick ?
You have normaly a file in the same folder than zinc.exe called "zinc.cfg", you can edit it with notepad
Here it's mine
--roms-directory=roms
--use-sound=yes
--sound-filter-enable=no
--sound-filter-cutoff=22050
--sound-surround-lite-enable=no
--sound-surround-lite-multiplier=40
--sound-stereo-exciter=no
--use-slow-geometry=yes
--use-mem-predict=no
--use-stackinram-hack=no
--use-renderer-cfg-file=renderer.cfg
--renderer=d3d_renderer.znc
--controller=Dinput\madll.dll
;--xxcontroller=pcfg\controller.znc
;--xxuse-controller-cfg-file=pcfg\defautperso.cfg
Check if the param on this file are ok.
Try to launch directly the file "mGalaxy_Script.exe", it will don't work but it's just to see if you have error message.
-
This system is a little bit complicated to configure if you never use it.
First, there is 2 emulator for this system psxmame and Zinc.
For Zinc have you installed the full package ? with ZiNcGUI.exe and all the plugging for joystick ?
You have normaly a file in the same folder than zinc.exe called "zinc.cfg", you can edit it with notepad
Here it's mine
--roms-directory=roms
--use-sound=yes
--sound-filter-enable=no
--sound-filter-cutoff=22050
--sound-surround-lite-enable=no
--sound-surround-lite-multiplier=40
--sound-stereo-exciter=no
--use-slow-geometry=yes
--use-mem-predict=no
--use-stackinram-hack=no
--use-renderer-cfg-file=renderer.cfg
--renderer=d3d_renderer.znc
--controller=Dinput\madll.dll
;--xxcontroller=pcfg\controller.znc
;--xxuse-controller-cfg-file=pcfg\defautperso.cfg
Check if the param on this file are ok.
Try to launch directly the file "mGalaxy_Script.exe", it will don't work but it's just to see if you have error message.
I have only zincgui.exe and not the zinc.cfg, but in the folder zcfg there is a file called defaultzinc.cfg, here is its content:
--roms-directory=Z:\Arcade\Zinc\roms
--use-sound=yes
--sound-filter-enable=no
--sound-filter-cutoff=22050
--sound-surround-lite-enable=no
--sound-surround-lite-multiplier=40
--sound-stereo-exciter=no
--use-slow-geometry=yes
I tried to create the file zinc.cfg (with the content that you posted) in the zinc folder but still doesn't work.
-
In fact ZincGui can make config file, and It's realy usefull, run a game with zincgui and copy/paste the file, renamed "zinc.cfg"
It seem your configuration isn't finished
You miss graphic renderer and controller renderer on your file.
--controller=Dinput\madll.dll this one is personal, you can't have the same
But you need theses one
--use-renderer-cfg-file=renderer.cfg
--renderer=d3d_renderer.znc
And I have in renderer.cfg
; renderer settings
XSize = 640 ; window/fullscreen X size
YSize = 480 ; window/fullscreen Y size
FullScreen = 0 ; Fullscreen mode: 0/1
ColorDepth = 32 ; Fullscreen color depth: 16/32
ScanLines = 0 ; Scannlines: 0=none, 1=black, 2=bright
Filtering = 3 ; Texture filtering: 0-3
Blending = 0 ; Enhanced color blend: ogl: 0/1; D3D: 0-2
Dithering = 1 ; Dithering: 0/1
ShowFPS = 1 ; FPS display on startup: 0/1
FrameLimitation = 1 ; Frame limit: 0/1
FrameSkipping = 1 ; Frame skip: 0/1
FramerateDetection = 1 ; Auto framerate detection: 0/1
FramerateManual = 100 ; Manual framerate: 0-1000
TextureType = 3 ; Textures: 0=default, 1=4 bit, 2=5bit, 3=8bit
TextureCaching = 2 ; Caching type: 0-2
TurnDisplay = 1 ; Turn the whole display (0-2, 0=default)
Can you make this emul working in stand alone mode ?
You need too the file "firmware.zip" and other bios file
-
Zinc wors well when i try to launch the roms from zincgui, the problem is that mgalaxy doesn't launch the roms.
-
Try to launch directly the file "mGalaxy_Script.exe", it will don't work but it's just to see if you have error message.
Try with this file called zinc.cfg in the same folder than zinc.exe
--roms-directory=Z:\Arcade\Zinc\roms
--use-sound=yes
--sound-filter-enable=no
--sound-filter-cutoff=22050
--sound-surround-lite-enable=no
--sound-surround-lite-multiplier=40
--sound-stereo-exciter=no
--use-slow-geometry=yes
--use-mem-predict=no
--use-stackinram-hack=no
--use-renderer-cfg-file=rcfg\defaultD3D.cfg
--renderer=d3d_renderer.znc
--controller=pcfg\controller.znc
-
Try to launch directly the file "mGalaxy_Script.exe", it will don't work but it's just to see if you have error message.
Try with this file called zinc.cfg in the same folder than zinc.exe
--roms-directory=Z:\Arcade\Zinc\roms
--use-sound=yes
--sound-filter-enable=no
--sound-filter-cutoff=22050
--sound-surround-lite-enable=no
--sound-surround-lite-multiplier=40
--sound-stereo-exciter=no
--use-slow-geometry=yes
--use-mem-predict=no
--use-stackinram-hack=no
--use-renderer-cfg-file=rcfg\defaultD3D.cfg
--renderer=d3d_renderer.znc
--controller=pcfg\controller.znc
With this file now mglaxy finally can launch zinc, thanks for the help but there is another problem... when i launch a zinc rom trought mgalaxy the controls that i mapped doesn't work.
-
Yep normal ^^.
It's because this line --controller=pcfg\controller.znc
I think you are using another pluggin, try with --controller=controller.znc, if you are using the controller.znc that is in the same folder than zinc.
Or if you are using the good one, add in the file use-controller-cfg-file=pcfg\defautperso.cfg with the good path to your controller cfg file.
-
Yep normal ^^.
It's because this line --controller=pcfg\controller.znc
I think you are using another pluggin, try with --controller=controller.znc, if you are using the controller.znc that is in the same folder than zinc.
Or if you are using the good one, add in the file use-controller-cfg-file=pcfg\defautperso.cfg with the good path to your controller cfg file.
All works well, thanks! (: