Author Topic: How to map "Esc" key to L2+Start on a DS3 using Xpadder  (Read 436 times)

xbmcgotham

  • Newbie
  • *
  • Posts: 1
How to map "Esc" key to L2+Start on a DS3 using Xpadder
« on: February 14, 2018, 10:53:49 AM »
Hi,

I cant figure out Xpadder. I am trying to only map the "Esc" key on the keyboard to a DS3 controller by using the L2 + Start buttons.

Trying to set this up so that I can close the PS emulator using the DS3 controller. The DS3 works great but cant make the emulator stop/close.

Is their anybody who could give a simple step by step guide how to add this to the Xpadder tool?

Thanks for the help.

Aeliss

  • Hero Member
  • *****
  • Posts: 750
Re: How to map "Esc" key to L2+Start on a DS3 using Xpadder
« Reply #1 on: February 15, 2018, 12:14:46 PM »
Select the first key.
"advanced" / "selection set" / "set 2 while held"
Now when you press this key you will activate set 2
Press this key (to activate set 2), press the second key and assign "esc" at this key in set 2.